EN
25
LAN
Interface LAN
IP Address
192.168.1.1
Mask
255.255.255.0
Gateway
0.0.0.0
LAN speed
Auto
Modbus TCP
Adres
255
Port
502
Porty TCP/IP
HTTP
80
FTP command port
21
FTP data port
22
Search
2323
Running of SM61IoT comes in two stages. In the first stage the proce
-
dures of testing and configuration reading in the activated SM61IoT, are
initiated. First, the device makes a test of external memory. If the test
result is not carried out correctly, the device will restart. After correct tes
-
ting, the configuration data are read out. The configuration data readout
error is signaled by switching on of a red diode PWR (fig. 2) and a proper
setting of an error status value (table 21*). The error of configuration
readout imposes the setting of default data presented in the table 3.
After configuring basic communication parameters, Modbus RTU for
USB interface and RS-485/232 for Slave mode is activated.
Then the device launches the next stage - the readout of
channels configuration for Master RS-485. The configuration readout
lasts for about 20 seconds and is signaled by switching on of REC diode
(fig. 2) in green color. The occurrence of a configuration readout er
-
ror disconnects the data readout and is signaled by switching on of a
Summary of Contents for SM61IoT
Page 17: ...17 pl...
Page 31: ...EN 31...