37
EN
Connection set ZP11-
X X X
System version:
SR11 with 1 controller
One common cable for thermocouples and heaters .... 1
SR11 with 2, 3, 4, 5, 6, 7 or 8 controllers
One common cable for thermocouples and heaters
1)
.. 2
SR11 with 4, 5 or 6 controllers
One cable for thermocouples ....................................... 3
SR11 with 4, 5 or 6 controllers
One cable for heaters ................................................... 4
SR11 with 7 or 8 controllers
One cable for thermocouples ....................................... 5
SR11 with 7 or 8 controllers
One cable for heaters .................................................... 6
Cable length:
3 m .........................................................................................1
6 m .........................................................................................2
Extra requirements:
without extra requirements - standard version .............................. 0
with an extra quality inspection certificate ..................................... 1
acc. to user’s agreements
2)
..........................................................X
Table 5. Order codes for the ZP11 connection set
Order example:
The code:
SR11- 3-2-0-1-0
means: SR11 - System for injection moulds
with heated channels; 3 - Housing width = 215 mm; 2 - with 2 BR11 con-
trollers; 0 - without RS-485 interface; 1 - with common connectors for
thermocouples and heaters; 0 - without extra requirements
Order example:
The code:
ZP11-1-2-0
means: ZP11 - Connection set for the SR11
system; 1 - for SR11 system with 1 controller and one common cable
for thermocouples and heaters; 2 - with a 6 m long connection cable;
0 - without extra requirements
1)
For SR11 systems with 5, 6, 7 ot 8 BR11 controllers, 2 cables are indispensable
2)
After agreement with the manufacturer
