4
The bottom of the grille is held in place by clips. Gently pull on the bottom of the grille until the
clips disengage; remove the grille from the car and put aside in a safe place.
The bottom clips (circled) are disengaged by pulling at the bottom of the grille
The headlamp bezel is held in place with 4 Torx screws. Note the parking lamp still attached.
To remove the headlamps:
a.
Remove the metal bezel ring, which is held in place with 4 screws. Use a T
‐
15 Torx
bit/screwdriver.
b.
As the last screw is removed, hold onto the headlamp, as it could fall.
c.
Remove the bulb from the assembly with a ¼ turn, remove the headlamp assembly from
the car and put it in a safe place. Unplug the factory harness from the bulb.
d.
Proceed to Step 2,
Method A
or
Method B.
C
D
