English
-
28
2.5. Press [
] to [Projector Type].
2.6. Press [
] or [
] to select [
LCD/DLP
].
2.7. Press [MENU] to exit.
7.21
I would like to resume the factory default setting
(Factory Reset)
7.21.1 Use function menu
1. Press [MENU] to activate the setting menu.
2. Press [
], [
], [
], or [
] to select [Setting].
3. Press [ENTER] to activate.
4. Press [
] or [
] to select [Advanced] menu.
5. Press [
] to select [Factory Reset].
6. Press [
] or [
] to select [Yes].
7. Press [ENTER] to execute.
7.21.2 Use Compound Key
1. Press
[ENTER] + [MENU]
simultaneously to restore the initial value.
7.22
I would like to change the power on image.
<Note> The power on image file must be less than 5 MB and in JPEG
format.
<Note> To save the file, please follow the instruction below:
File path: \DCIM\100MEDIA, for example: J: \DCIM\100MEDIA
File name: four English four numbers, for example: LUMN0001.JPG
1. Press [MENU] to activate the setting menu.
2. Press
[
], [
], [
], or [
] to select [Setting].
3. Press [ENTER] to activate.
4. Press
[
] or [
] to select [Advanced] menu.
5. Press
[
] to select [Power On Image Setting].
6. Press [ENTER] to activate.
7. Press
[
] or [
] to select [Power On Image Setting] and press [
] or
[
] to select [Default/Custom].
8. Press
[
] or [
] to select [Power On Logo Show time] and press [
]
or [
] to set up the time.
9. Skip to Step 12 if your select [Default] in Step 7.
10. Press [
] or [
] to [Power On Image Select] and press [ENTER] to
read selected file.
