English - 22
Pan Flip
On/
Off
Activate the reverse Pan command
Tilt Flip
On/
Off
Activate the reverse Tilt command
Preset Speed
1. 5 per second
2. 25 per second
3. 50 per second
4.
120 per second
Set the rotation speed of the cradle
head when Preset is executed
PTZ Speed
Comp
On/
Off
PTZ Speed Compensation
Zoom Limit
x1 ~
x20
Optical zoom limit
Dig-Effect
Mirror
1.
Off
2. Mirror
3. Flip
4. Flip
Set the mode at which the image is
turned
Auto Focus
AF Sensitivity
1. Low
2.
Middle
3. High
Select the AF triggering speed. The
higher the speed is, the faster AF is
triggered
AF speed
Fast /
Normal
Focus speed after AF triggering
AF Frame
Full Frame
/Center
AF frame setting, when central area
was set as AF frame, focusing will be
on the center of the screen. When Full
Frame was set as AF frame, focusing
will be calculated based on the full
screen
Zoom
Tracking
On
/ Off
Turn on/off zoom tracking
Ethernet
DHCP
On
/ Off
Enable/Disable DHCP setting using left
and right arrow keys and press
[ENTER] to apply setting.
IP Address
192.168.100.150
Press [ENTER] to modify the items;
select the item to be modified using left
and right arrow keys, and modify the
value using numeric keys.
Subnet mask
255.255.255.0
Press [ENTER] to modify the items;
select the item to be modified using left
and right arrow keys, and modify the
value using numeric keys.
Gateway
192.168.100.254
Press [ENTER] to modify the items;
select the item to be modified using left
and right arrow keys, and modify the
value using numeric keys.
Audio
Audio In
Line In
/Mic In
Set Audio In
Audio Enable
On /
Off
Turn on/off audio output
Audio Volume
0~
C
~10
Volume Setting
Audio Delay
0 ~ 500 ms/
Off
Set audio delay
Encode
Sample Rate
1.
48 KHz (AAC)
2. 44.1
KHz
(AAC)
3. 16
KHz
(G.711
4. 8 KHz (G.711)
Set the encode type and sample rate
SDI supports the audio output of 48
KHz only.
System
Prompt
On /
Off
Turn on/off the prompt information on
the display
IR Receive
On
/ Off
Turn on/off the infrared reception
