English - 24
Chapter 6 Descriptions of Major Functions
6.1 I would like to switch to VC-A50PN
1. Press
[Camera 1 ~ 3]
on the
remote control
to select VC-A50PN.
Camera 1 ~ 3 is selected with IR SELECT.
6.2 I would like to save the current lens position data
1. Hold
[ ID]
on the
remote control
to save the current position data.
ID shall be a digit [0 ~ 9].
Use VISCA Command to store position data to [0 ~ 127]
6.3 I would like to clear the saved position data
1. Hold
[Reset + ID]
on the
remote control
to clear the given position data.
ID shall be a digit [0 ~ 9].
Use VISCA command to clear position data stored in [0 ~ 127]
6.4 I would like to turn on the back light compensation function
1. Press
[Back Light]
on the
remote control
to turn on or turn off the back light compensation
6.5 I would like to adjust the shooting angle of the lens
1. Press
[Tilt
]
or
[Tilt
]
on the
remote control
to adjust the angle upward or downward.
2. Press
[Pan
]
or
[Pan
]
on the
remote control
to adjust the angle to right or left.
3. Press
[Pan - Tilt Reset]
on the
remote control
to reset the angle to the center point.
6.6 I would like to zoom in/out images
6.6.1 Adjust image size
1. Press
[Fast +]
on the
remote control
to zoom in images.
2. Press
[Fast -]
on the
remote control
to zoom out images.
6.6.2 Fine-tune image size
1. Press
[Slow +]
on the
remote control
to zoom in images.
2. Press
[Slow -]
on the
remote control
to zoom out images.
6.7 I would like to adjust the focal length
6.7.1 Auto tune
1. Press
[AF]
on the
remote control
to adjust automatically.
6.7.2 Manual focus
1. Press
[MF]
on the
remote control
to turn on the manual focus function.
2. Press
Focus - [+]
or
Focus - [-]
to adjust.
6.8 I would like to adjust the AF speed
6.8.1 Adjust the AF Sensitivity
Triggering speed of focus. The higher the speed is, the faster focus is triggered
To shoot fast-moving objects,
AF Sensitivity
can be set to
[High]
or
[Medium]
, which is applicable
