background image

 

English 

9

 

Chapter 4 Instruction for installation 

4.1 Preparation before installation 

Installation and connection of HD camera requires special skills. To install 
by yourself, please follow necessary steps, ensure steady and tight 
installation of the device, and pay attention to your safety to avoid any 
accident. 

4.1.1  Ensure the safety of the installation environment. Please do 

not install the device on unstable ceiling or in a place where 
the device is in danger of falling to avoid any accident. 

4.1.2  Please check whether accessories in the box are complete 

or not. Please contact the supplier for any shortage, and 
make sure to keep the accessories in the box intact. 

4.1.3  Please choose a proper place for installation of camera in 

advance. Please determine an installation place according 
to the following requirements 

4.1.1.1 Confirm the position for the object to be captured. 

4.1.1.2 Confirm whether the camera is set at a proper distance from 

other light sources. 

4.2 Instruction for installation 

4.2.1  I would like to install camera on the desk 

4.2.1.1 

Precautions for installation 

  Please install the machine on a flat desk 

  Do not grab the camera head by hand when handling the device 

  Do not rotate the camera head by hand. Improper rotation may 

result in breakdown of the camera 

Summary of Contents for VC-B30U
































Reviews: