7921KD-1-INS-LAB-RevC14
3
OPERATION
See assembled Bath Seat at right. Contact
your GF distributor immediately if you see
any issue with fit, form, function, or safety. For
more information on GF Health Products, Inc.
parts and services, please contact your GF
distributor or www.grahamfield.com.
Adjusting Leg Height
Push in the adjustment button and move
to the desired height position until it clicks
into place. Ensure legs are locked at the
same height and all leg adjustment buttons
protrude fully through adjustment holes.
WARNING: Ensure all Bath Seat
components are secure before
each use.
Center of Balance During Use
The point where the Bath Seat will tip
forward, rearward or sideward is determined
by its center of balance and stability, and the
center of balance and stability is affected
by the user’s body position and weight
distribution. If you fail to heed the following warnings, falling or tipping may occur and
could cause severe personal injury.
WARNING: To avoid falling or tipping:
Have someone help you until you know the balance points of your Bath
Seat and how to avoid tipping.
Do not put downward weight on one side or corner of the Bath Seat.
Do not put downward weight on the backrest.
Do not reach or lean if you must shift your weight to do so. Ask for help
or use a device to extend your reach.
Never try to reach an object if you must move forward in your seat and
your buttocks do not stay in full contact with the seat.
Never lean backward to reach an object.
MAINTENANCE
WARNING: Check the Bath Seat weekly for signs of damage or
cracking. If damage or cracking of any component of the Bath Seat
is found, DO NOT use the Bath Seat. Contact your Graham-Field
distributor.
Inspect the Bath Seat weekly and ensure all components are secure.
To clean the Bath Seat, wash it with soap and water or a mild detergent, then rinse.
Ensure the Bath Seat is rinsed well before use.
fig. 6
7931R / 7931KD-1
7921R / 7921KD-1
