LF1600-INS-LAB-RevE15 • LF1600 Stand Assist
8
button socket head
cap screw
tubular
cross bar
seat pad and handle
bar support unit
seat and
cross bar assembly
4. Insert the two tubular cross bars into the holes on the seat pad and handle bar
support units as shown above. Align the small holes on the cross bar undersides
with the holes in the support units. Install the four button socket head cap screws
through the support units into the cross bars. Use the hex key to tighten. The
finished assembly is shown at right above.
base bracket
kneepad side
support assembly
kneepads
lockable casters
5. Insert the kneepad side support assembly into the base brackets as shown above.
The kneepads and arm curvature should be facing away from the lockable casters.
kneepad side
support assembly
seat and cross
bar assembly
6. Insert the seat and cross bar assembly into the tubes at the top of the kneepad
side support assembly as shown above.
Summary of Contents for LF1600
Page 16: ... Made in Taiwan ...
