ILLUMINATION
AB217 LUXEON HR30 Application Brief ©2016 Lumileds Holding B.V. All rights reserved.
LUXEON HR30
Assembly and Handling Information
Introduction
This application brief addresses the recommended assembly and handling
guidelines for LUXEON HR30 emitter. This emitter is specifically designed and tested
for use in the most demanding environments and conditions. This emitter delivers
high efficacy and quality of light for distributed light source applications in a compact
3.0mm x 3.0mm package. Proper assembly, handling, and thermal management, as
outlined in this application brief, ensure high optical output and reliability of these
emitters.
Scope
The assembly and handling guidelines in this application brief apply to LUXEON 3030
HR30 with the following part number designation:
L130 – AABBCCHR00000
Where:
AA –
designates nominal ANSI CCT (27=2700K, 30=3000K, etc.)
BB –
designates minimum CRI (70=70CRI, 80=80CRI, etc.)
CC –
designated ESD protection level per JEDEC JS-001-2012 (00=2kV and 0T=8kV)
In the remainder of this document the term LUXEON emitter refers to any product in
the LUXEON product series listed above. Any handling requirements that are specific
to a subset of LUXEON emitters will be clearly marked.