Lumin Smart Panel - Outdoor
DOCUMENTATION AND INSTALLATION MANUAL
11
STEP 4. Measure and Mark Hole Locations for Mounting
Tools
: Tape measure, marker, stud-finder (optional), and level.
NOTE:
The LSP must be mounted in the vertical orientation shown.
Verify that the bracket
placement provides a level installation without introducing strain on the conduit attachments. Then
mark the applicable hole locations using the mounting brackets. Exact hole locations may vary
depending on existing conditions. Qty 4 holes are required for sufficiently mounting the LSP.
Location of Mounting Holes and Slots (Large Arrows)
Bracket Attachment Stud Locations (Small Dashed Arrows)
Marking Hole Locations Using Brackets