2
READ BEFORE USE
The LSP interfaces with existing electrical panels and includes conduit/fittings for installation with
surface-mount electrical panels. Verify the label model number is LSP-12-OR before performing an
outdoor installation.
Please review the product’s techni
cal ratings and specifications (pg. 35) to confirm
it is suitable for your application prior to installation.
NOTE:
The
LSP Circuit Label & CT Table
(provided with the LSP) must be completed and delivered to the
home/building owner upon the successful installation of the LSP. A completed
LSP Circuit Label & CT
Table
is required in order to complete LSP setup.
Warnings
LSP installation and servicing involves dangerous voltages that can cause injury or death. In addition to
specific instructions accompanied by the symbol throughout this booklet and product labeling,
observe the following safety precautions:
•
Installation and servicing must be conducted by a qualified professional, according to local and
national electrical codes
•
Lumin Certified Installer training is required for installation and servicing
•
Review entire manual before starting the installation or servicing
•
Personal protective equipment should be worn when installing or servicing the product
•
Do not use the product in any way other than its intended use
•
Do not install or operate the product outside the conditions specified on pg. 35
•
Do not open, attempt to access, or touch any internal product parts
—
dangerous voltages would
be exposed even if main service feed is disconnected
•
Do not use the product if it is damaged or appears to be damaged
•
Use only the wires and cables supplied with the product
•
Power relays are evaluated for 100,000 cycles at a 1.5 HP inductive load (e.g., motors)
—
larger
loads of this type may result in premature relay failure
•
Adhere to all relevant local and national safety regulations for electrical work
•
This manual covers outdoor surface mounted electrical panel installations only. Connecting the LSP
conduit to an outdoor recessed electrical panel is the sole responsibly of the installer and shall be
done in accordance with all local codes and regulations.