10
STEP 3. Determine LSP Mounting Position Relative to Conduit Routing
WARNING: HIGH VOLTAGE. ENSURE MAIN BREAKER IS OFF. MAIN SERVICE LINES ARE ALWAYS LIVE.
AVERTISSEMENT: HAUTE TENSION. ASSUREZ-VOUS QUE LE DISJONCTEUR PRINCIPAL EST ÉTEINT. LES
CONDUCTEURS DE SERVICE PRINCIPAUX SONT TOUJOURS SOUS TENSION.
NOTE:
The LSP must be mounted in the vertical orientation shown (with the conduit exiting the
LSP from the bottom).
To prepare for mounting, position the LSP in alignment with the knockout hole
in the electrical panel. Temporarily feed the wire whips and conduit fitting into the knockout hole.