After sales support
TEL: 1300 366 144
info@telefixsales.com.au
1.
Remove the upper hinge cover (1).
2.
Remove the three screws (2) that hold the upper door hinge (3).
3.
Lift the door and place it on a padded surface to prevent scratching.
4.
Remove the three screws (6) that hold the lower door hinge (5).
5.
Remove the hold cover (7) and transfer it to the same location on the opposite side.
6.
Insert the lower door hinge in the right side,
fix the lower right hinge by tightening all the screws.
7.
Remove the pin cap (9) from the right side of the upper
frame of the door, and then transfer it to the same location
on the opposite side.
8.
Put the door on the lower door hinge (5), keep the door level, and then
fix the upper hinge (3) to the body (8) by the screws.
9.
Install the upper hinge cover (1) on the upper hinge.
FIGURE 1
FIGURE 2
Summary of Contents for LUTW-16EQ
