9
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF542 & CF552
3. Ceiling Fan Assembly
(continued)
STYROFOAM
PARTIALLY ASSEMBLED
CEILING FAN
Figure 10
3.10
Carefully turn and place the partially assembled Ceiling
Fan right side up, on the styrofoam being careful not to
bend the Ceiling Fan Blades (Figure 10) .
3.11
Remove the Hanger Ball from the 4 .5” Downrod by
loosening the Set Screw in the Hanger Ball until the Ball
falls freely down the Downrod (Figure 11) .
Remove the Pin from the Downrod, then remove the
Hanger Ball .
Retain the Pin and Hanger Ball for reinstallation in
Step 3 .18 .
NOTE: Do not loosen the screw holding the green
ground wire.
PHILLIPS HEAD SET SCREW (LOOSENED)
HANGER BALL
4.5" DOWNROD
PIN
GREEN GROUND WIRE
Figure 11
THREE 80" MOTOR LEADS (UNTWISTED)
4.5" DOWNROD
Figure 12
3.12
Separate, untwist and unkink the Three 80” Motor
Wires .
Route the 80” Black and White Motor Wires through the
4 .5” Downrod (Figure 12) .
THREE 80” MOTOR WIRES (UNTWISTED)
