8
U.L. Model No.: CF742PF
3. Ceiling Fan Assembly
(Continued)
BLADE
ASSEMBLY
M5 x 13 mm
FLANGE SCREWS
(2 preassembled in flange)
Figure 9
3.10
Attach One Blade Assembly to the Motor Hub using Two
M5 x 13mm Flange Screws Preassembled in Flange (Figure 9).
Make sure the Screws are NOT tightened.
Repeat this procedure for the other Four Blade Assemblies.
NOTE: The blade flanges have an interlocking
feature that must be fully engaged before
tightening the screws. Make sure all the flanges
are properly engaged and then tighten the flange
screws. If one of the flanges does not seat properly
on the motor hub, loosen the adjacent flange
screws, re-engage and reseat the flanges, then
tighten the screws again.
A spare M5 x 13mm Flange Screw is in the hardware bag,
if needed.
3.9
IMPORTANT: THE SIDE OF THE FAN BLADE
HAVING THE RIB LINE MUST BE FACING
UPWARDS AS SHOWN IN FIGURE 8.
Mount the Blade Flange to the Fan Blade using Three
M5 x 10mm Washer Head Blade Screws (supplied) (Figure 8).
Repeat this procedure for other Four Fan Blades and Blade
Flanges.
FAN
BLADE
BLADE FLANGE
M5 x 10mm WASHER HEAD
BLADE SCREW (3)
RIB LINE
(facing up)
Figure 8
To reduce the risk of personal injury, do not bend
the blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.
WARNING
!
A spare M5 x 10mm Washer Head Blade Screw is in the
hardware bag, if needed.
