2. General Information
2
U.L. Model No.: SW93/SW95/SW96
One Phillips head screwdriver
One blade screwdriver
One wire stripper
The SW93 & SW96 Wall Controls are designed
to operate multiple ceiling fans, and Not any
accessory light kits.
The SW95 Wall Control is designed to operate only
one ceiling fan, and Not an accessory light kit.
The SW93 / SW95 / SW96 Wall Controls do not
require a receiver.
The SW93 Wall Control is rated for 3.0 Amp,
120 VAC, 60 HZ full load.
The SW95 Wall Control is rated for 1.25 Amp,
120 VAC, 60 HZ full load.
The SW96 Wall Control is rated for 5.0 Amp,
120 VAC, 60 HZ full load.
Do not install or use fan if any part is damaged
or missing. Call Toll-Free for replacement
parts:
1-800-777-4440
WARNING
!
1.1: Package Contents
1. Unpacking Instructions
Part Description
Quantity
A
Wall Control Switch
1
B Knobs
2
C
Wire Connectors
3
Tools Needed for Assembly
This product is designed to use only those
parts supplied with this product and/or any ac-
cessories designated specifically for use with
this product by Luminance Brands. Substitution
of parts or accessories not designated for use
with this product by Luminance Brands could
result in personal injury or property damage.
WARNING
!
A
C
B
To avoid erratic speeds and possible damage to
your ceiling fan, use the Wall Control only with fans
pull chain switches set to their high speed settings.
All ceiling fans must be completely installed before
installation of the Wall Control.
Your new Wall Control will require a grounded
electrical supply line of 120 volts AC, 60 HZ circuit.