Núm. de modelo U.L.: SW93/SW95/SW96
22
5. Operación de control de pared
NOTA: El botón giratorio del control de ventilador
enciende el ventilador a la velocidad máxima para
ayudar a que el motor arranque. La velocidad del
ventilador disminuye con la rotación en el sentido
de las agujas del reloj.
5.1
Ajuste los ventiladores en sus posiciones de la
cadena de tiro correspondientes a la velocidad
ALTA. Luego, use su control de velocidad para
seleccionar cualquiera de las velocidades y además
APAGADO (Figura 14).
NOTA: Al girar completamente en sentido contrario
al de las agujas del reloj se alcanza la posición de
APAGADO. Las tres o cuatro velocidades del venti-
lador se seleccionan rotando el botón giratorio de
posición en posición en el sentido de las agujas
del reloj.
Figura 14
En el caso de ventiladores equipados con
dispositivos de velocidad variable incorpo -
rados: Estos dispositivos se deben ajustar a
su VELOCIDAD MÁXIMA para que funcionen
correctamente. Los ajustes de la posición de
velocidad deben ser realizados sola mente con
este control de ventilador en la posición de
APAGADO. Si se cambian o conmutan estos
ajustes mientras el control de ventilador esté en
funcionamiento, se podría dañar el control.
PRECAUCIÓN
!
1er jalón: ALTA
2do jalón: Intermedia
CHAIN COUPLER
3-SPEED SWITCH
PULL CHAIN
WALL
CONTROL
5.2:
(Figura 15)
IMPORTANTE
Tenga siempre el interruptor del ventilador
ajustado en la posición de velocidad ALTA antes
de utilizar el control de pared. Para evitar un
uso accidental de la cadena de tiro, acorte dicha
cadena cortándola 1 pulgada por debajo del
cuerpo del interruptor.
CHAIN COUPLER
SHORTENED
3-SPEED SWITCH
PULL CHAIN
CONTROL
DE PARED
CADENA DE TIRO
DEL INTERRUPTOR
DE 3 VELOCIDADES
ACOPLADOR DE CADENA
ACOPLADOR DE CADENA
CADENA DE TIRO
DEL INTERRUPTOR
DE 3 VELOCIDADES
ACORTADA
Figura 15
3rr jalón: Baja
4to jalón: APAGADO