TO 120VAC
SOURCE HOT
WALL CONTROL
BLACK WIRE
TO FAN
MOTOR LOAD
WALL
CONTROL
120 VAC HOT
BLACK WIRE
WIRE CONNECTOR
3.7
Connect the Wall Control BLACK Wire to the Fan/
Motor Lead (BLACK or RED) Wire using a new Wire
Connector (supplied) (Figure 4).
NOTE: Use only the wire connectors supplied
with the new wall control to secure electrical
connections.
TO 120VAC
SOURCE HOT
FAN/MOTOR
BLACK OR RED
WIRE
WALL CONTROL
BLACK WIRE
TO FAN
MOTOR LOAD
WALL CONTROL
WIRE
CONNECTOR
4
U.L. Model No.: SW93/SW95/SW96
3. Wall Control Installation (Continued)
3.5
Set the new Wall Control in the OFF position
(full counter-clockwise) (Figure 3).
3.6
Pull the Knob off the Wall Control (retain for future
use) (Figure 3).
Figure 3
WALL CONTROL
KNOB
3.8
Connect the Wall Control BLACK Wire to the
120 VAC Source BLACK (HOT) Wire using a new
Wire Connector (supplied) (Figure 5).
Figure 4
Figure 5
