Page 7
For technical questions, please call 1-888-866-5797.
Item 64487
Maintenance
Procedures not specifically explained in this manual
must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION OR FIRE:
Turn the Power Switch of the Lantern off. Unplug the Lantern from its DC Adapter (if used) and allow the
Lantern to cool completely before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM LANTERN FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
1�
BEFORE EACH USE,
inspect the general
condition of the Lantern� Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation�
2� Clean outside regularly to prevent dust
from accumulating� Use damp cloth
during cleaning and dry before use�
3� There are no serviceable or replacement
parts in the Lantern or DC Adapter�
Battery Disposal
1� Access the battery from the bottom of the Lantern�
Battery is inside base.
Access from the bottom.
Figure C
2� Remove four screws from the bottom of the Lantern
3� Cut wires from the battery using insulated wire
clippers and remove battery from the Lantern�
4� Do not attempt to replace the battery�
5� Li-Ion BATTERY MUST BE RECYCLED
OR DISPOSED OF PROPERLY�
Do not
short, incinerate or open battery�
