Version: 1.4
Date: 16-06-2020
Contact information: for more info please contact the product supplier
Luminext BV | Velperengh 2b | 3941BZ Doorn | Nederland | +31(0)343 420257 | support@luminext.eu | www.luminext.eu
© Luminext BV 2018
3
Wiring diagram
Connect the 230VAC to the terminals marked with L and N.
If needed, connect an external load to the terminal marked with C (Common) and one of the terminals
marked with NC (normally closed) or NO (normally open).
Configuration
When the Gateway is powered, the SIM card is activated and the gateway is administrated in
Luminizer, the left and right LED should lit. Dependent of the GSM range this may take several
minutes. The center LED will lit as soon as communication with surrounding OLC300S controllers
takes place. Use the Luminizer management software for configuration of the Gateway.
Mounting
The Gateway can be mounted inside a cabinet as well as externally on a light pole. In the cabinet you
must apply the ‘Vandal-proof cabinet antenna’ (as shown below), which needs to be installed in the
cabinets roof.