www.Lumishore.com
Lumishore UK Unit 3, Technium 1, Kings Road, Swansea, SA1 8PH, UK | +44(0)208 144 1694 | Info@Lumishore.com
Lumishore USA 7137 24TH Court East Sarasota, Florida 34234 | (941) 405-3302 | Sales@LumishoreUSA.com
3
Mechanical Installation:
Using a hole saw cut a 2in hole, always cut the hole smaller than needed and file to the correct size to
ensure a snug fit. For indoor installations use the supplied spring clips, gently pull back the spring clips
and feed the light into the hole, releasing the spring clips as the light is positioned.
For exterior installations or wet areas it is recommended that the light is fixed in place using a suitable
marine sealant / adhesive.
Remove the spring clips
from the fixture and dispense a small amount of
adhesive around the glass bezel. Push into place using a slight rotation of the light to spread the adhe-
sive evenly. Clean any excess adhesive using a soft cloth and soap and water –
DO NOT USE CHEMICAL
CLEANERS
.
Warranty
LUMISHORE Ltd warrants the
LUX Downlight DL50
to be free from defects in workmanship and materials
for a period of two years, starting from the date of original purchase. Misuse, abuse, improper installation,
neglect, improper shipping, damage caused by disasters such as fire, flood, and lightning, installation by
unqualified personnel, unauthorized repair or modification will void this warranty. For the avoidance of
confusion and doubt, non-compliance with all installation, maintenance and operating instructions in this
document constitute non-conformance with warranty terms.
The LUX Downlight Control Module is designed to work with Lumishore LUX strip lighting products
ONLY, do not use with other Strip light brands, this will invalidate the warranty.
MARINE SEAL
ANT
Summary of Contents for LUX DL50
Page 4: ......
