Surface Mount
e
-lites
Page 4
3.2 Light Connections
Each light is supplied with 6.5 Feet of 18-gauge cable and should be connected to a terminal strip.
The light cable maybe connected to a larger gauge cable, however care must be taken when making the connections to protect from corrosion.
When connecting the light cable larger gauge cable, LUMISHORE recommends soldering and heat shrinking the wires together or using a terminal strip with
proper size connectors.
A Single Pole Single Throw (SPST) switch (not supplied) may be installed so the lights may be turned ON or OFF at a convienent location. Refer to Section 3.4 for
recommended switch wiring.
3.3 Optional RM-12 wireless remote light controller
When installed, the RM-12 allows the lights to be turned ON or OFF with the click of a button on the remote. This accessory contains 2 wireless remotes and a 12VDC only
(cannot be used on 24V systems) wireless receiver relay box which is sealed; do not attempt to open. The replacement battery type for the wireless remote is
VR22/CN22/CN32A or equivalent. For installation refer to section 3.4.
3.4 Connection example
