Connecting additional Hubs
You will need additional SUPRA i-Connect Hub(s) (60-0317) and
DMX extension cables (1m - 24-0077, 5m - 24-0078 or 15m -
24-0099)
Each hub can power up to 4 lights, and up to 4 hubs can be
connected together in one system. To add a additional hubs
follow the diagram:
45-0101 - Rev 2.0
4
www.Lumishore.com
Cleaning and Maintenance
LUMISHORE Ltd warrants the SMX 53 to be free from defects in
workmanship and materials for a period of two years, starting
from the date of original purchase. Misuse, abuse, improper instal-
lation, neglect, improper shipping, damage caused by disasters
such as fire, flood, and lightning, installation by unqualified
personnel, unauthorized repair or modification will void this
warranty. For the avoidance of confusion and doubt, non-compli-
ance with all installation, maintenance and operating instructions
in this document constitute non-conformance with warranty
terms
.
Warranty
LUMISHORE lights require simple cleaning. Lights should be
checked often to ensure the light body and lens area are free from
sea growth. In the event that your light requires cleaning, we
recommend the use of a soft cloth or soft bristled brush.
• DO NOT use any abrasive cleaning materials as these may
damage the body of the light.
• DO NOT use any cleaning fluids that contain solvents, acids or
alkalis.
• DO NOT clean using pressure washing or sandblasting equip-
ment.
Slight discolouration of body may occur over life. This does not
affect performance, and is not subject to warranty.
Due to nature and high build quality it may on rare occasions be
possible to see small levels of condensation, this is normal for high
power LEDs and will disappear after cooling and does not harm
operation in any way.
If the lights are covered for any reason, e.g maintnence, or paint-
ing DO NOT switch the lights on until the covers are removed.
SUPRA Lumi- Hub
Field Installable
Connectors (Supplied)
SUPRA i-Connect Hub
Scene
Field Installable
Connectors (Supplied)
DMX Extension
Cable used to
connect hubs together
Warranty
Battery /
PSU
12 or 24 V
On/Off
Scene
SUPRA
i-Connect Hub Switch
Fuse or
Circuit
Breaker
Check all ports
without connectors
have dust caps fitted
The world’s
fi
rst marine ligh
�
ng API (Applica
�
on
Programming Interface) allowing plug-&-play integra
�
on of
Lumishore underwater ligh
�
ng systems with cer
�fi
ed Mul
�
-
Func
�
on Displays (MFDs) crea
�
ng a centralized control
pla
�
orm for the en
�
re vessel reducing helm clu
�
er and
simplifying vessel opera
�
on. www.lumishore.com/lumi-link
