www.Lumishore.com
Lumishore UK Unit 3, Technium 1, Kings Road, Swansea, SA1 8PH, UK | +44(0)208 144 1694 | Info@Lumishore.com
Lumishore USA 7137 24TH Court East Sarasota, Florida 34234 | (941) 405-3302 | Sales@LumishoreUSA.com
7
Testing the Lights
The underwater lighting system should always be tested before the boat goes back in the water. Check
that each light comes on, and all lights change in sequence as per the system operation section above.
See the problem solving guide for advice on resolving any issues.
Once the boat is back in the water, check for any water ingress on the installed lights. Any ingress should
be dealt with immediately. The lights should be checked several times over the first 24-hours and
periodically after that to ensure installation is satisfactory.
Maintenance and Cleaning
LUMISHORE lights require simple cleaning. Lights should be checked often to ensure the light body and
lens area are free from sea growth. In the event that your light requires cleaning, we recommend the use
of a soft cloth or soft bristled brush. The glass should be kept clean with a plastic scraper or soft brush.
Regular cleaning of the lens will ensure that the light module delivers maximum optical output. DO NOT
use an abrasive cloth or cleaning agent as permanent damage to the lens may occur.
DO NOT use any abrasive cleaning materials as these may damage the body of the light.
DO NOT use any cleaning fluids that contain solvents, acids or alkalis.
DO NOT clean using pressure washing or sandblasting equipment.
Slight discolouration of body may occur over life. This does not affect performance, and is not subject to
warranty.
Due to nature and high build quality it may on rare occasions be possible to see small levels of
condensation, this is normal for high power LEDs and will disappear after cooling and does not harm
operation in any way.
No chemicals, cleaners, chemical sprays or sandblasting should ever be applied / used on lights — this
will negate warranty
To prolong device lifetime and prevent marine growth build up, a good quality anti-fouling system must
be used to coat the external body of the device. This should be renewed regularly.
Product Support
If you have questions or comments, please e-mail info@lumishore.com or call USA (941) 405-3302,
United K44(0)208 144 1694, or 33(0)493 582 537.
Maintenance & Support
