•
Never remove the kettle from its base unit while in operation. Switch the appliance off first.
•
Take care to close the lid properly before switching on. Otherwise, the appliance will not switch off automatically and hot water may overflow.
•
The kettle is intended for water heating only, and is not to be used for any other liquid.
BEFORE USE
•
Remove all packing material from the kettle.
•
Before connecting the kettle check that voltage indicated on the rating label corresponds with the mains voltage in your home.
•
Place the filter.
•
Wash the kettle with soap, rinse it thoroughly, fill it with cool water up to the “MAX” mark, boil it and empty 2-3 times. The appliance is ready for use.
INSTRUCTION FOR USE
FILTER PLACING
•
Open the lid by pressing the lid open button.
•
Place the filter between two grooves near the spout at the front of the kettle.
•
Ensure that the filter is pressed down to the bottom of the grooves and fits correctly then close the lid.
NOTE:
Never leave the filter loose in the kettle. Never remove the filter while the kettle contains hot water.
FILLING
•
Remove the kettle from the base unit.
•
You can fill the kettle with water via the spout or opening the lid, by pressing the lid open button.
•
Do not fill the kettle below “MIN” mark to prevent the heating element running dry while operating.
•
Do not fill the kettle above “MAX” mark. Avoid overfilling to prevent the water spilling out during the boiling process.
SWITCHING ON
•
After filling your kettle with water, place it on the base unit.
•
Connect the plug to power supply and press On/Off switch, the light indicator will switch on automatically. The appliance will begin to operate.
SWITCHING OFF
•
When the water boils, the kettle will switch off automatically and the operation light indicator will go off.
3
