7
NIGHT VISION:
-
Normal: Image is displayed in Full-Color (best for daytime or
well-lit room – keep the red filter on the front lens)
-
B&W: Image is B&W (good for nighttime city setting)
-
Green: Image is traditional night vision green (good for
nighttime field use)
WI-FI:
-
ON: Turns the Wi-Fi signal ON. See page-13 for instructions
-
OFF: Turns the Wi-Fi single OFF
DATE/TIME:
-
Please see Page-8 on how to set the date/time on your
monocular
FORMAT:
-
Cancel: Exit formatting
-
OK: Format your SD-card (all files will be erased!)
DEFAULT SETTINGS:
-
Cancel: Exit to main menu
-
OK: Returns monocular to factory settings
VERSION:
-
Displays current software version installed in your device
ELECTRONIC IMAGE MAGNIFICATION ZOOM:
Your unit is also equipped with electronic zoom function, which allows
you to change image magnification from 6x to 36x. To increase the
image magnification rotate the Menu Super Controller (9) to the right
(clockwise) and look into the ocular – you will see the image
magnification increase with each rotation click by 3x. See below
magnification chart according to each rotation:
6x – 9x – 12x – 15x – 18x – 21x – 24x – 27x – 30x – 33x – 36x
You can observe the current zoom level on the bottom left corner of the
image display once you start rotating the Super Controller. To decrease
the image magnification, rotate the Super Controller to the left
(counter-clockwise) and image magnification will decrease by 3x with
each rotation. Factory default setting is 6x
NOTE: During any image magnification adjustments, please avoid
pressing onto the Super Controller, as this may activate the device main
menu.
