background image

18 

 

is highlighted in red and then press the Menu Controller for 2 seconds. 
The profile will be saved and reticle will now appear in the new 
position on the screen (position where you moved it during 
adjustment). 

6.

 

At this time you can take follow up shots aiming at the bullseye of the 
target and make sure that bullet impact is within acceptable distance 
from the bullseye. If the bullet impact is still not on the target, you can 
repeat the zeroing process again and when saving as the same profile 
(P1) the system will ask if it is OK to change the initial adjustment – 
select OK and the new adjustment will be saved under the same 
profile. 
There are total of 5 profiles, (P1P2P3P4 and P5) which can be 
saved independently and then loaded from the menu. This 
allows you to zero the scope for either up to 5 different 
weapons, or at 5 different distances or for up to 5 different 
calibers/bullet types (or any combination thereof). To switch 
between different profiles during adjustment rotate the Menu 
Controller and observe the Profile number in the upper right 
corner of the display. 

 

SELECTING RETICLE ADJUSTMENT PROFILES 

Once the reticle profile is saved it stays saved unless you choose to replace 
it during a new adjustment, or return to factory settings by selecting 
Default Settings from the main menu. Do not select Default Settings if you 
wish to keep your reticle profile settings!
 
 
To select (load) a reticle adjustment setting (profile), activate main menu, 
then select RETICLE ADJUSTMENT, then select Saved Adjustment, then 
select which Profile number you wish to load and then select load. If you 
wish to delete the profile, instead of loading it, select delete at this time. 

 

RETICLE AND SCOPE USE SPECIFICS 

Please note and remember the following specifics of using this 
particular device as a riflescope: 

 

Since this device is not a dedicated riflescope, the reticle will 
not be visible during video recording playback. 

 

This device was originally designed as a handheld monocular 
and is therefore not suitable for any caliber with recoil energy 
above 4.5.  It includes most 5.56NATO cartridges, which have 
higher recoil energy than the civilian .223REM caliber. 
Therefore, if you are using this device as a riflescope on an AR-
15 platform or on a bolt-action rifle that accepts not only 

Summary of Contents for LN-G3-MS50





















Reviews: