background image

 

 

    

 

LN-NVM3-HR / LN-NVM5-HR 

 

WIDE-VIEW HIGH-RESOLUTION NIGHT 

VISION MONOCULAR 

 

INSTRUCTION MANUAL 

 

INTRODUCTION 

 

Thank you for purchasing a quality LUNA OPTICS

®

 product.  With proper care and 

maintenance your device will provide many hours of operation and outstanding 

reliability.  Please read this manual – it is your key to enjoying this exciting and 

hi-tech product! 

 

NIGHT VISION 

 

Without getting too technical and confusing, let’s try to understand how this 

device works and what it can and cannot do: 
 

1.

 

Your night vision device works on the principle of amplifying 

(intensifying) available light.  The process is called light amplification.  A 

special tube inside the device does the job – all you have to do is to power 

the device on and the tube starts amplifying whatever the light is available at 

the moment – therefore it is important to understand that this device is not 

suitable for daylight operation, since there is already enough light available 

during daytime to see without any additional help.  

Therefore, the first and 

most important rule of any night vision device is – never use it during 

daylight, or in any bright light condition, which allows you to see well 

with your naked eyes! 

 

Summary of Contents for LN-NVM5-HR

Page 1: ... do 1 Your night vision device works on the principle of amplifying intensifying available light The process is called light amplification A special tube inside the device does the job all you have to do is to power the device on and the tube starts amplifying whatever the light is available at the moment therefore it is important to understand that this device is not suitable for daylight operati...

Page 2: ... notice since your night vision device amplifies available light hundreds of times please be sure not to turn the unit on during daylight or in a well lit room the image will be way too bright for your comfortable viewing and it also may permanently burn the tube inside the unit and will surely void your warranty Please note that for the safety of this device it has lens covers with a little pinho...

Page 3: ...gain and make sure the green light indicator is off The green glow will continue for up to several minutes depending on the outside light conditions This is normal Always replace the objective lens cover after the unit is turned off and no longer is in use FOCUSING THE UNIT To obtain the sharp image first rotate the ocular focusing wheel 4 in either direction until you notice in which position the...

Page 4: ...iew THIS IS NORMAL BLACK DOTS ARE MICROSCOPIC PARTICLES INSIDE THE TUBE AND RESULT FROM THE TUBE MANUFACTURING PROCESS WHICH IS NEVER COMPLETELY SPEC FREE IMPORTANT INFORMATION NEVER 1 Turn on the unit without lens cover during daylight or in a well lit area 2 Try to disassemble the unit by yourself or by anyone who is not our authorized technician Doing so may result in injury and will void any w...

Reviews: