DALI Display, Quick Start Guide
© 2013, Lunatone Industrielle Elektronik GmbH
4.1 Screen Saver Image
The screen saver image needs to be a 800 x 480 pixel PNG (Portable Network Graphic) image file and
it needs to be named screensaver.png.
The image can be copied to the DALI Display by using one of the following methods:
USB Stick:
Place the background image on the following directory on an USB stick:
/AutoRun/LTUpdate/home/resource/screensaver.png
The file system on the DALI Display is case sensitive, so please check for correct spelling. Then
plug in the USB stick; the file will be copied to the DALI Display.
Ethernet Network:
See explanation for custom background image above.
4.2 Forgotten Password
The master- passcode 1220 will always unlock the panel.
5.
Addressing / Grouping
Addressing Method
System extension
Search for already installed ballasts on the bus by scanning all
available DALI addresses on both DALI buses. Additionally the
addressing algorithm will be started for DALI ballasts that have no
short address.
Reinitialization
Deletes all DALI addresses, removes all DALI groups and starts a
new addressing routine.
This will delete and readdress
all
ballasts on the bus.
