WARRANTY
INFORMATION
TONNEAU COVER
MAINTENANCE
page 4
© 2019 Lund, Inc. All rights reserved.
Tonno Pro
®
and the Tonno Pro
®
logo are trademarks of Lund, Inc.
Lund International
888-477-3729 • Visit us at lundinternational.com
™
Limited Lifetime Warranty
Tonno Pro offers a limited lifetime warranty against defective materials or workmanship on all aluminum rails, aluminum components, clamps,
hinges, bows and hardware.
10 Year Vinyl – Tonno Pro uses the highest quality 24 oz vinyl in the industry. We offer a full 10 year warranty against defective materials or
workmanship on the vinyl cover.
Warranty Conditions
This warranty is against defective materials or workmanship. This warranty is void if the product has been damaged by accident, unreasonable
use, neglect, improper service or installation. Any modification, acts of God, normal wear and tear or other causes not arising from defective
materials or workmanship is not considered under this warranty.
Examples of Conditions That Void Our Warranty:
Wind Whip Damage
– The cover must be secure to truck when vehicle is in motion.
Improper Cleaning
– The use of cleaning chemicals not approved for cleaning vinyl. Do not use products such as Armor All. These are vinyl
conditioners and will cause the vinyl to shrink or to fade prematurely.
Overloading of Cargo
– Cargo must not be allowed to touch the cover in any position. Protrusions in the vinyl will cause stress in the fabric
and cause unnecessary weak spots in the material.
Securing the Rear EZ-Clamps
- Failure to properly close the rear EZ-Clamp handles will allow the cover to open and flap in the wind. This
will cause the hinges to slam on the truck and break.
Execution and Performance
Tonno Pro reserves the right to determine if all warranty conditions have been met. Upon determination, Tonno Pro may require the product to be
returned postage prepaid to further inspect the warranty claim. Given that all conditions are met, Tonno Pro will either repair or replace (at Tonno
Pro’s determination) the product or the component. In the event that a product must be returned, our Return Authorization # must be obtained
through our customer service department and must be on the returned parcel for it to be accepted. This warranty gives you specific legal rights and
you may also have other legal rights which vary from state to state.
To prolong the usage and function of your tonneau cover, you should check it regularly for wear, proper fit, and debris caught on the cover. Check
mounting hardware regularly to insure that all clamping mechanisms are tight and secure.
1.
When cleaning your tonneau cover, make sure to clean your vehicle and cover in a shaded place like under a tree or in an open garage.
2.
First flood the cover with water to remove surface grit that will scratch the finish when wiped. Wash your cover with cool, clean water and a
mild soap.
3.
Next, using a hose, rinse the cover well making sure to remove all traces of soap and wipe off excess water using a sponge. Be careful to
hose down the entire truck to prevent soap from streaking your truck’s paint finish. Do not use chemicals like detergents, dish washing liquids,
bleaches, harsh cleansers, strong cleaners, dry-cleaning solvents, or any other strong chemicals as a cleanser.
4.
Apply some quality vinyl cleaner that you can find in the nearest auto shop. Using a white all-cotton towel, wash the entire tonneau cover with
the cleaner.
Never spot clean
your tonneau cover to avoid rings or bright spots on your tonneau cover. Make sure that you only use a
soft
cotton cloth
or
sponge
as a cleaning tool. Do not use rough, abrasive cleaning pads because these can scratch the vinyl, creating pores that
allow dirt and other unwanted particles to stick.
Do not
use vinyl protectants that contain petroleum, silicone or citrus-based additives to ensure
your cover looks its best!
TONNEAU COVER MAINTENANCE
