© PROPERTY OF LUNDIX IT SWEDEN, ALL RIGHTS RESERVED – THE DISCLOSURE OR OTHER COMMUNICATION, COPYING, REPRODUCTION AND ANY USE WHATSOEVER IS FORBIDDEN WITHOUT THE WRITTEN AUTHORIZATION
OF LUNDIX IT.
SPC SmartBox User Manual
Revision
1.1
Page
22 of 62
Reference
2017-110
Element
Type
Description
Enable KNX communication
Checkbox
Check this to enable the KNX communication
IP Address
Input text
IP Address of the KNX IP Gateway
Username
Input text
KNX IP Gateway username
Password
Input text
KNX IP Gateway password
Save
Button
Saves settings
Reset
Button
Resets form to current settings
4.3.3
Sync SmartBox and KNX System
After you have setup the KNX communication you need to import the datapoint configuration to SPC
SmartBox object database. Go to
Configuration->Object Database
, select
KNX
and click on
Sync
Database with KNX System.
The datapoints you defined in the KNX IP gateway should then appear in
the database listing. See example below.
Please see section
Object Database
for more details.
NOTE! Every time you change the datapoint settings in the KNX IP gateway you need to update SPC
SmartBox Object Database by using the
Sync Database with KNX system
.