© PROPERTY OF LUNDIX IT SWEDEN, ALL RIGHTS RESERVED – THE DISCLOSURE OR OTHER COMMUNICATION, COPYING, REPRODUCTION AND ANY USE WHATSOEVER IS FORBIDDEN WITHOUT THE WRITTEN AUTHORIZATION
OF LUNDIX IT.
SPC SmartBox User Manual
Revision
1.1
Page
57 of 62
Reference
2017-110
7
Appendix
7.1
SmartBox Hardware Specification
Processor
ATMEL ARM Cortex A5
Flash
256MB NAND
RAM
128MB
Power input
12V DC
Power Consumption
1W empty load
Network
2 x Ethernet RJ45 Connectors 10/100/1000 Mbps
USB
2 external USB 2.0 Type A, 1 internal USB 2.0
System Platform
OpenWRT
Wireless Module
Z-Wave Plus
Environmental Conditions
Operation: 0°C~ 50°C
Storage: -20°C ~ 60°C
Humidity: 5% ~ 90%, Non-Condensing
Dimension
167 x 123 x 30mm (WxDxH) (without battery module)
Weight
0.24Kg (wihout battery module)
Battery Backup Module (optional)
Type: Li-On, Voltage: 3.7V, Capacity:5800mAH
7.2
SmartBox LED Definitions
LED
Definition
Color
Operation
Power
Power
Off
Device is powered down.
Green
Device is powered up.
Status
System Status
Solid Green
System is working normally.
Solid Orange
System is booting up.
Blinking Orange
When the system is set back to default factory setting, the
Status LED indicator will blink 3 times in orange.
When the system is restarted, the Status LED indicator will
blink once in orange.
Online
Online Status
Off
The default gateway is unreachable.
Solid Green
The default gateway is reachable.
LAN
LAN Port Status
Off
The port is link down
Solid Green
Link is up and works at 10 or 100Mbps or 1000Mbps.
Blinking Green
The traffic is active.
WAN
WAN Port Status
Off
The WAN port has no support. WAN LED should always be
off.
Z-WAVE
Z-Wave Status
Off
Z-Wave is disabled or not ready.
Solid Green
Z-Wave is in operation.
Normal Blinking Green
Z-Wave is in Include mode when the indicator is on and off
for 1 second in turn. Under this mode, the device is allowed
to join other sensors.
Slow Blinking Green
Z-Wave is in Exclude mode when the indicator is on and off
for 2 second in turn. Under this mode, the device is allowed
to disconnect with other sensors.
USB1
USB1 Port Status
Off
USB device is unplugged on USB1 port.
Solid Green
USB device is plugged on USB1 port.
USB2
USB2 Port Status
Off
USB device is unplugged on USB2 port.
Solid Green
USB device is plugged on USB2 port.