© PROPERTY OF LUNDIX IT SWEDEN, ALL RIGHTS RESERVED – THE DISCLOSURE OR OTHER COMMUNICATION, COPYING, REPRODUCTION AND ANY USE WHATSOEVER IS FORBIDDEN WITHOUT THE WRITTEN AUTHORIZATION
OF LUNDIX IT.
SPC SmartBox User Manual
Revision
1.1
Page
59 of 62
Reference
2017-110
The report tells us that the SmartBox has IP address 192.168.0.101
7.5.2
arp
The command
arp
is available both on Windows and Linux. Look for the device MAC address (shown
on the SmartBox bottom sticker). Example:
arp –a
…
(192.168.0.101) at 00:04:19:19:28:58 [ether] on eth0
…
The report tells us that device with MAC address 00:04:19:19:28:58 has IP address 192.168.0.101.
7.5.3
Smartphone app Fing
If you have access permissions from you smartphone to the same network as the SmartBox is
connected to, you can use the app Fing from Domotz to find the IP address of the SmartBox. Just
install the app, connect to the network and look for manufacturer Connection Technology Systems
and you will see the IP address of the SmartBox.
7.6
Create Pushover Account and Get Keys
To use the Pushover notification, you need an User Key and an API Token/Key. This section will
describe how to register yourself and request these keys.
1.
Go to the website
www.pushover.net
and click on
Login or Signup
.
2.
In the Signup section, enter your email address and password and click on the
Signup
button.
3.
After you clicked on Signup you will be re-directed to the main web page again. Now check your email
account for the Pushover email, because you need to validate your email address. After you received
the email and clicked on the link, you can go for the login option.
4.
If your supplied information is correct, it will show you the following web page. In this example the free
account is successfully registered and you have your
User Key
, which is a 30 character string.
