■
30
│
GB
│
IE
LBFW 150 A1
Heating milk – fast setting
This function is intended for heating milk rapidly. It should be used for no more
than 20 minutes at a time.
Ƈ
Pour about 150 ml of tap water into the appliance base .
CAUTION – MATERIAL DAMAGE!
►
Do not fill the appliance base with mineral water, as the minerals will
deposit sediment inside the appliance.
►
Ensure that the water level never exceeds the MAX marking
.
Ƈ
Place the open baby bottle (filled with milk) and the basket into the
appliance base .
Ƈ
Turn the function selector to the symbol (heat milk – fast setting). The
function indicator will light up red and the appliance will heat the milk
up to a temperature suitable for your baby.
NOTE
►
While the milk is heating up, gently wave the bottle back and forth a few
times to ensure the heat is distributed evenly.
Ƈ
Remove the baby bottle from the appliance as soon as the function indicator
lights up blue.
NOTE
►
The exact duration of the heating process depends on the quantity of milk
and its original temperature, i.e. room temperature (20°C) or refrigerator
temperature (7°C).
Ƈ
Switch the appliance off by moving the function selector to the position
O
.
Ƈ
Ensure that the milk is at a good temperature before feeding your baby.
To do this, spill a few drops of the heated milk onto the inside of your wrist
and check whether the temperature is safe for your baby. A temperature of
approx. 37 °C is suitable as it corresponds to your own body temperature.
Summary of Contents for LBFW 150 A1
Page 3: ......