30
31
Betty R
Betty R
Deut
sc
h
Engli
sh
2
2
Mounting Accessoires
Peppi V4
The transmitter features a
corrugated bottom allowing
for moving the transmitter up
to 1.5 cm to the left or to the
right in the Peppi.
1
1
2
Our Peppi allows to mount the remote
switch on a handlebar.
Have a look at:
www.lupine.de
(Art.No. 760)
2
Quickrelease mount and Peppi V4 are both available
with the mountset.
Have a look at:
www.lupine.de
(Art.No. 764 for
Ø 25.4 mm/Art. No. 763 for Ø 31.8 mm)
Mountset
For mounting, please first loosen the bolts on
the helmet mount/headband. Please now use
the o-ring and bolts which came with your quick-
release mount. Put the bolt through the hole of
the handlebar mount, then put the second o-ring
onto the tip of the bolt.
The order of lamp, o-ring,
handlebar mount, o-ring, bolt must be strictly
adhered to as shown in the picture in order to
ensure flawless functionality.
After that, tighten
the bolt slightly first, then securely with 2 Nm.
Cover the open thread with the included plug.
For mounting the Betty R on a handlebar, two
optional CNC Quick Release mounts are available.
Have a look at
www.lupine.de
(Art.No. 825 for
Ø 25.4 mm/Art.No. 831 for Ø 31.8 mm)
Handlebar mounting:
Put the clamp around the
handle bar and close.
GoPro Adapter
Have a look at:
www.lupine.de
(Art.No. 144)