FEATURES - OPERATIONS
Dura-JET 4 Features
•
Sanitizable - Easy Cleaning - Bacteria Free
•
Military heavy duty water sealing technology- extremely reliable
•
Dual powerful massage Jet-streams with air control
•
Easy to install, clean and service
•
Air output
•
Built-in color LED (optional)
Dura-JET 4 Installation
1. Determine the surface of the tub that you want to install the unit, ensure that the surface is flat
2. Locate a position to drill a hole with the dimensions as shown in Fig. 1
3. Insert the unit into the hole from inside the tub
4. Connect the air hose connector to an air control button
5. Use a hand screwdriver to tighten the four screws
6. Plug the power cord of the unit into the spa power box
3.5 in/90mm
3.5 in/90mm
Figure 1. Drill Instruction Figure 2. Motor Dimension
Attention: Any modification to the Dura-JET 4 will void the warranty
Cleaning Instructions
1. Ensure the unit is off
2. Remove the front cover
3. Remove the impeller and the impeller cover
4. Use anti bacterial solution to clean all the plastic parts
5. Reassemble the system
