9
III) INSTALLATION INSTRUCTIONS
There must be enough space around the chair for proper operation. There is
a required minimum clearance of 32 inches (81cm) from the front of the chair
and 24 inches (68cm) from the wall to the back edge of the base of the chair.
1) Step 1: Unpacking
Carefully take out the armrests, main body, and toolkit (contains control)
from the boxes.
Note: The Luraco Legend PLUS requires at least two people to assist
with assembly.
2) Step 2: Assembly
i)
Please refer to Fig.3 and follow the steps (1-3) below to install
the armrests.
ii)
Connect the air tubes (1).
Please note: The alphabetic labels
on each air tube must be matched in order for the chair to
operate correctly.
iii) Insert the armrest guides (2)
iv) Install the mounting screws (3)
Fig.3: Armrest Installation
ATTENTION:
Be sure no children, pets,
or objects are around chair.
Allow enough space for installation.
