* If the certain input socket do not insert the
temperature probes, the relative channel Display will
show over range " - - - - - ".
4-2 Type J/T/E/R/S measurement
All the measuring procedures are same as the Type K (
chapter 4-1 ), except to select the Temp. Sensor type to
" Type J, T, R, S " by pressing the " Type Button " ( 3-5,
Fig. 1 ) once in sequence until the up LCD display show
the " J, K,T, E, R, S " indicator.
4-3 Data Hold
During the measurement, press the " Hold Button " ( 3-3,
Fig. 1 ) once will hold the measured value & the LCD will
display a " HOLD " symbol.
Press the " Hold Button " once again will release the data
hold function.
4-4 Data Record ( Max., Min. reading )
1)The data record function records the maximum and
minimum readings. Press the " REC Button " ( 3-4, Fig.
1 ) once to start the Data Record function and there
will be a " REC " symbol on the Display.
2)With the " REC " symbol on the Display :
a) Press the " REC Button " ( 3-4, Fig. 1 ) once, the
" REC MAX " symbol along with the maximum value
will appear on the Display.
If intend to delete the maximum value, just press
the " Hold Button " ( 3-3, Fig. 1 ) once, the Display
will show the " REC " symbol only & execute the
memory function continuously.
8