4-2A Insert the SD card
Prepare a " SD memory card " ( 1 GB to 16 GB, optional ),
insert the SD card into the " SD card socket " ( 3-9, Fig. 1).
The front panel of the SD card should face against the
down case.
4-2B Decimal point setting consideration
The numerical data structure of SD card is
default used the " . " as the decimal, for
example "20.6" "1000.53" . But in certain
countries ( Europe ...) is used the " , " as the
decimal point, for example " 20, 6 "
"1000,53". Under such situation, it should
change the Decimal character at first, details
of setting the Decimal point, refer to Chapter
6-8, page 17
4-3 Data logger ( Save the measuring data with
time information )
Auto Datalogger ( Set sampling time 1 second )
≧
a. Start the datalogger
Press the " LOGGER Button ( 3-4, Fig. 1 ) once , the lower
position of LCD will show the text " DATALOGGER " and
flashing per sampling time ( for example 2 seconds.... ),
at the same time the measuring data along the time
information will be saved into the memory circuit,
the Beeper will sound ( if beeper sound is enable, refer to
Chapter 6-7, page 17 ).
Remark :
*
How to set the sampling time, refer to Chapter 6-4, page 15.
6
