2) If select the upper to " YES ", press the " Enter Button
" ( 3-8, Fig. 1 ) once again, the Display will show text
" Ent " to confirm again, if make sure to do the
Micro SD memory card format, then press " Enter Button "
once will format the Micro SD memory clear all the existing
data that already saving into the Micro SD card.
8-2 Set sampling time (Second )
When the display show " SP - t "
1)
Use the "
▲
Button" (3-5, Fig. 1) or "
▼
button" (3-2, Fig. 1)
to adjust the value ( 0
→
to Manual Datalogger or
2 ~ 3600 seconds
→
to Auto Datalogger ), the adjusted value
will be flashed. When the desired value is set, press the
" Enter key " (3-8, Fig. 1) once, save the default sample value.
2)
" sp-t " setting is complete, then display will go to
the " Auto power Off " settings screen (Chapter 8-3).
8-3 Set Auto power OFF management
When the display show " PoFF "
1)
Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button "
( 3-2, Fig. 1 ) to select the upper text to "YES " or
"no ".
YES - Auto Power Off management will enable.
no - Auto Power Off management will disable.
2)
After select the upper text to " YES " or " no ", press the
" Enter Button " ( 3-8, Fig. 1 ) will save the setting
function with default.
24
