layer Temp calibration screen (eg SCREEN22), at this time press HOLD and
REC KEY> 3 SEC. Then away from the user calibration screen and return
to the measurement screen(eg SCREEN1).
6-5-5. CO2 calibration: In SCREEN24 screen, press ENTER KEY proceeds
SCREEN25 adjust the picture, when the machine with a standard value of a
given machine steady, press
▲
or
▼
KEY to adjust the value of the
machine calibration standard (eg SCREEN25) as a standard machine after
determining setting press ENTER KEY value store, then back to the first
layer% RH calibration screen, then press TIME / SET KEY proceeds BARO
screen (eg SCREEN26).
6-5-6.BARO calibration: In SCREEN26 screen, press ENTER KEY proceeds
SCREEN23 adjust the picture, when the value of the machine with a
standard machine is stable, press
▲
or
▼
KEY adjust the machine
calibration standard value (eg SCREEN27) as a standard machine, after
determining press ENTER KEY to store the value, then back to the first
layer Temp calibration screen (eg SCREEN26), at this time press HOLD and
REC KEY> 3 SEC. Then away from the user calibration screen and return
to the measurement screen(eg SCREEN1).
6-5-7.Clear user adjustment :
A. During power off , Press and hold the "
▼
" key then press power on ,
B. When power on screen show from (eg SCREEN 28) to (eg SCREEN 28),
then release the "
▼
" key ,until into measurement screen
(eg SCREEN 1), meter will clear up the adjustment and be filled with factory
calibration data.
SCREEN1
SCREEN2
SCREEN3
SCREEN4
SCREEN5
13
Summary of Contents for PM-1064SD
Page 22: ...20 ...