7-2 Auto Datalogger ( Set sampling time
≧
2 second )
a. Start the datalogger
Press the " Logger Button ( 3-6, Fig. 1 ) >2 second , the LCD will
show the logger function (eg SCREEN12) , the display will show symble
" LOGGER " at the same time the measuring data along the
time information will be saved into the memory circuit.
Remark :
*
How to set the sampling time, refer to Chapter 4-5-3 page 8 .
*
How to set the beeper sound is enable, refer to
Chapter 4-5-5 page 8 .
b. Pause the datalogger
During execute the Datalogger function , if press the
" Logger Button " ( 3-6, Fig. 1 ) once will pause the
Datalogger function ( stop to save the measuring data
into the memory circuit temporally (eg SCREEN13)).
Remark :
If press the " Logger Button " ( 3-6, Fig. 1 ) once again ,will execute the
Datalogger again (eg SCREEN12).
c. Finish the Datalogger
During pause the Datalogger, press the "Logger Button "
( 3-6, Fig. 1) continuously at least two seconds, the " LOGGER "
indication will be disappeared and finish the Datalogger.
16
Summary of Contents for PM-1064SD
Page 22: ...20 ...