7-3 Manual Datalogger ( Set sampling time = 0 second )
a. Set sampling time is to 0 second
Press the " Logger Button ( 3-6, Fig. 1 ) >2 second , the display will
show the text "LOGGER "(eg SCREEN14), then press the " Logger Button "
( 3-6, Fig. 1 ) once, the display " LOGGER count " text will be increase
once (eg SCREEN15) and Beeper will sound once, at the same time the
measuring data along the time information will be saved into the memory circuit.
The Display will show the Position ( Location ) no. and saved into the SD card too.
Remark :
During execute the Manual Datalogger, press the " ▲
Button " ( 3-7, Fig, 1 ) the Display will show position no. (eg SCREEN14).
It can use the "
▲
Button " ( 3-7, Fig. 1) or "
▼
Button " ( 3-8, Fig. 1 )
to set the measuring Location no. ( 1 to 99, for example room 1 to room 99 ) to
identify the measurement location , the Display will
show P x ( x = 1 to 99 )(eg SCREEN14) .
b. Finish the Datalogger
Press the " Logger Button " ( 3-6, Fig. 1) continuously at
least two seconds, the " LOGGER " indication will be
disappeared and finish the Datalogger.
7-4 To check the time, sampling time information
During the normal measurement screen ( not execute
the Datalogger ),
1)
If press " Time Button " ( 3-5, Fig. 1 ) once , the LCD display
will present the time information of Year/Month/Date/Hour/Minute/Second ( h.m.s )
in the Display (eg SCREEN 6).
2)
Then the display will present the Sampling time information of second unit.
in the Display (eg SCREEN 7).
17
Summary of Contents for PM-1064SD
Page 22: ...20 ...
