12. SYSTEM RESET
If the meter happen the troubles such as :
CPU system is hold ( for example, the key button can
not be operated... ).
Then make the system RESET will fix the problem,and meter will be power oFF.
The system RESET procedures will be either following
method :
During the power on, use a pin to press the " Reset Button "
( 3-10, Fig. 1 ) once a while will reset the circuit system.
13. RS232 PC SERIAL INTERFACE
The instrument has RS232 PC serial interface via a 3.5
mm terminal ( 3-12, Fig. 1 ).
The data output is a 16 digit stream which can be
utilized for user's specific application.
A RS232 lead with the following connection will be
required to link the instrument with the PC serial port.
Meter
PC
(9W 'D" Connector)
Center Pin............................................Pin 4
(3.5 mm jack plug)
Ground/shield...........................................Pin 2
2.2 K
resister
Pin 5
22
Summary of Contents for PM-1064SD
Page 22: ...20 ...