4-3-6.
▲
/FUNCTION KEY(3-5,Fig.1):
A.When the setting screen press the button, the value increases function.
Long function. press and hold to quickly increase the value
B.In measuring screen (eg SCREEN1) long press button> 2 SEC., Then
switch to the TWA measurement functions (eg SCREEN4).
4-3-7.
▼
/ALARM KEY(3-6,Fig.1):
A.When the setting screen press the button, the value was down function.
Long press and hold down the value of fast function.
B.In measuring screen (eg SCREEN1) long press button> 2 SEC., Then
Into the ALARM function (eg SCREEN16).
4-4.Setting function easy instructions:
* SET SD F: Executive SD memory card format.
* SET DATE: Into the year
、
month
、
day adjustment.
* SET TIME: Into the hours
、
minutes
、
seconds adjustment.
* SET SP-T: Data logger sampling time setting.
* SET P-OFF: Auto Power Off Setting.
* SET BEEP: Beeper sound ON/OFF setting
* SET DEC: SD Card Decimal character setting USA or EURO.
* SET T-C/F: Temp. Unit
℃
/
℉
setting.
* SET hPa(Barometer unit setting)
* SET ALARM: Upper and lower alarm value setting.
* SET PM2.5 Hour TWA: PM2.5 Time-Weighted Average setting.
* SET Meter Altitude(Altitude value setting)
* SET ESC: Escape setting.
4-5.Setting screen Description:
4-5-1.SET SD F(SD memory card format):
A.Press
▲
or
▼
buttons to select YES or NO, when YES is selected and press
ENTER key to start the Format function.
B.When no press ENTER KEY store, press TIME / SET KEY proceed to the
next function setting(SET SD F
→
SET DATE).
4-5-2.SET DATE(Real time clock setting):(Year/Month/Date,Hour/Minte/Second)
A.Press
▲
or
▼
key year value adjustment,
▲
or
▼
then press and hold up,
down fast adjustment. Press ENTER then the set value is stored and the
month of adjustment functions, and so on the day / time / minute / second to
do the setting.
B.When no press ENTER KEY store, press TIME / SET KEY proceed to the
next function setting(SET DATE
→
SET SP-T).
7
Summary of Contents for PM-1064SD
Page 22: ...20 ...
