11
Setting limits from the EDU
11.1
Setting the open limit from the EDU
The open and close limits define the top and bottom of the shade, and are used to determine
which direction the shade must turn in order to raise or lower. Refer to the keypad’s instruction
sheet to set the limits remotely.
Tap the “Open limit button”
( ). The green LED on the
roller 100 EDU will turn on steady,
indicating that the EDU is in
“Set open limit mode.”
Green LED
Tap the
open limit button
11.2
Adjust the position of the EDU to
the desired open limit using the
clockwise and counterclockwise
buttons ( ).
Use the
counterclockwise
and clockwise
buttons to move
the EDU
Press and hold the “open limit
button” ( ) for 5 seconds. The
green LED on the roller 100 EDU
will flash for 2 seconds, then go
dark, indicating that the current
position has been stored as the
open limit.
11.3
Flashing green LED
Press and hold the
open limit button
for 5 seconds
Page 15
Sivoia
®
QS
roller 100
TM
Pocket Mount
Installation instructions
