R
Installation Instructions
Occupant Copy
Please Read
SZ-CI-USB-CPN5138
USB Interface
PELV (Class 2: USA) Device
5 V
60 mA
Stanza
TM
Features
• Integrates a Stanza guest room lighting control system
with a PC or other digital equipment that supports USB
devices.
•
Provides a basic serial string command set that allows a
PC to monitor and control lighting.
• Programmed and commissioned by a SZ-CI-PRG
Programming Control Interface.
• Should not be used in “Advanced” systems with a
permanently installed SZ-CI-PRG.
• Wireless connection allows easy mounting near
integration device.
Mounting
1. Secure the provided mounting clip to a flat, clean
surface with the double-sided tape on the clip.
Then secure the USB interface in the mounting
clip.
2. Connect the provided USB cable from the device
to the 3rd party equipment.
3. Use provided antenna clip and double-sided tape
to securely mount the antenna.
4. Mount in an accessible location for convenient
access to the programming button, LED, and USB
cable.
5. The unit cannot be mounted in a full metal
enclosure or between two metal surfaces.
6. When mounting, provide sufficient space for the
antenna and USB cable.
FCC Information
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not expressly approved by Lutron Electronics Co. could void the user’s authority to operate this
equipment. Operation is subject to the following: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Dimensions
Dimensions are in inches.
0.89
0.843
0.44
0.255
4.0
0.5
1.691
0.78
Antenna Clip
Mounting Clip
USB Mini-B Female Connector
31.5
FCC Information
Changes or modifications not expressly approved by Lutron
Electronics Co. could void the user’s authority to operate this
equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. Operation is subject to the following: (1) This device may
not cause harmul interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
