Application Note #734
12
www.lutron.com/support
®
Light Level Indicator / Locator Light Mode
This feature can enable or disable the Light Level Indicator and the Locator Light .
–
Light Level Indicator -
Light bar behavior when load is ON and it has not been touched for about 2 seconds .
–
Locator Light -
Light bar behavior when load is OFF .
Default Setting: ON / ON
1 .
Pull
the Front Accessible Service Switch (
FASS
) out to the
open position .
2 .
Press and hold
the
Off
button . (Press the left side of the button to
not mistakenly affect the light bar .)
3 . While continuing to
hold
the
Off
button,
push
the Front Accessible
Service Switch (
FASS
) in to the closed position . Continue to
hold
the
Off
button
for approximately 6 seconds
. The light bar will begin to
flash slowly
(~4 times/second) .
4 .
Release
the
Off
button and
LED 1
will continue to
flash slowly
(~4 times/second) .
Note:
The control will automatically
exit this menu
after 1 minute
of inactivity .
PULL
PRESS AND HOLD
MIN
SEC
PUSH
HOLD
RELEASE
(continued on next page . . .)
