8
0698-301 Motor B1+B2 Battery - 01/20
en
2.2 Proper use
A battery powered drum and container pump consists of drive motor B1 Battery or B2 Battery and pump
tube to suit the particular application. The pump is only used to transfer pure, turbid, water-like, aggressive
and non aggressive liquids.
• Motor is not allowed to be operated in explosion hazard areas.
• Do not use for pumping flammable liquids.
• Only use the motor with the pump tubes provided and observe to the maximum density and viscosity
limits (
→
Operating instructions pump tube).
• Motor must be held in hand during proper use.
• Pull off battery after use and connect it to the battery charger.
• The motor may only be operated in an upright position.
• Check the engine for operational safety before each use.
• Motor may only be operated with correctly mounted pump tube.
• Motor must not be exposed to weather or dusty environment.
• Do not store motor over aggressive vapours.
• When working on the motor or pump tube, always remove the battery from the motor.
• Avoiding damages on the motor, only use batteries and battery chargers provided by Lutz.
• Make sure that no moisture gets into the motor or battery.
• Danger of injury due to free running drive shaft.
• Observe following technical data:
Motor
Order No. 0001-115
Order No. 0002-515
Speed (1/min)
5000-12000
5000-12000
Motor technology
BLDC
BLDC
Nominal power (watt)
70
260
Weight without battery (g)
400
428
Ambient temperature (°C)
0-40
0-40
Sound pressure level dB(A)
< 70*
< 70**
Battery
Order No. 0332-027
Order No. 0332-026
Rated voltage (v)
10.8
21.6
Rating (Ah)
1.5
4
Battery engineering
Li-Ion
Li-Ion
Recommended storage
temperature (C°)
0-40
0-40
Ambient temperature (°C)
0-40
0-40
Weight (g)
190
712
* determined with pump tube PP 25-L SL
** determined with pump tube PP 32-R SL
